Sima VS-502 Bedienungsanleitung PDF herunterladen (Seite 11)

Operation

When AC power is first applied, all outputs will be muted and all the lights will come on for three seconds

and then go out. The Power / Stand-by light will be lit dim red. The Auto Input and Volume

Stabilization modes will be active as default. When the unit detects an active video input (composite, S-

Video, or component video), the Power / Standby light will turn off and the active input will be selected.

Power

As long as AC power is not lost, the previous status (last selected input, Volume Stabilizer mode and

AUTO SELECT status) will be resumed when Power / Stand-by is pushed. If AC power was lost, the unit

will default with input #1 selected, Volume Stabilization on and Auto Input on.

Inputs

Pushing a input button on either the front panel or on the IR remote will cause the current input and

associated LED to go off and the new input to come on.

Auto Input Mode

If the Auto Input mode is on, as a new input becomes active, the VS-502 will automatically change to the

new input. If you want to go to another A/V source, simply select the input using the front panel button or

the remote. If you don’t want the VS-502 to automatically select an active input, turn the Auto Input mode

off. Please note when you activate Auto Input mode, it scans the inputs when the VS-502 is on or in the

stand-by mode. A new input becoming active will cause the unit to wake from standby, and select the

new input.

When the unit is in the standby mode, the Power/Standby light will be dim

and all other lights will be off.

When a video device is turned on, like a VCR on Input #1, the Power/Standby

LED will turn off; the input corresponding to the device will turn on, along with

the Auto Select LED.

If a second device is turned on (say the DVD player on input #2) the # 2 light

will illuminate and it will be selected and fed to your TV.

If the second device is turned off, after about 5 seconds, input #1 will be

selected.

If both devices are turned off, after about one minute, the VS-502 will turn off

and go into standby mode waiting for an input.

Note: If an input goes off and back on in less than 5 seconds, the VS-502 will not

sense the input change so no input change may occur, to avoid flicker.

Volume Stabilizer Active

(Only on analog audio – no effect on digital audio)

If the Volume Stabilizer Active light is on, then the output of the audio switcher will be routed through

the Volume Stabilizer circuitry. When the Volume Stabilizer Active light is off, the audio signal is

bypassed and the Volume Stabilization setting will not have any affect on the audio signal.

Page 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Keine Kommentare

Sima VS-502 Bedienungsanleitung Seite 11